1 5

SFP and SFP+ Optical Transceiver Cleaner Pens

SFP and SFP+ Optical Transceiver Cleaner Pens

R 0.00
R 0.00
Sale Sold out
Taxes included.

SFP/SFP+ Optical Transceiver Cleaner Pens are precision tools designed for removing dust, oil and contamination from the connector end faces inside SFP and SFP+ transceiver ports. PGS supplies SFP transceiver cleaner pens in South Africa at wholesale pricing for data centres, telecoms networks, fibre installation teams and distributors.

These are consumable tools. Teams that work with fibre regularly go through them. Buying from a wholesale source makes more practical sense than ordering single units from a retail supplier. As a fibre optic cleaner pen supplier in South Africa , PGS is set up for recurring bulk orders.

What Is an SC Mechanical Fast Connector?

An SC mechanical fast connector is a factory pre-polished, field-installable single-mode fibre connector that uses a mechanical clamping system to align and secure bare fibre in the field. It replaces the fusion splice and epoxy process entirely. A technician can terminate a fibre end using only a fibre stripper and cleaver, in roughly 90 seconds per connector.

The two most common types are:

SC/APC (Angled Physical Contact): The ferrule is polished at an 8-degree angle, pushing reflected light back at an angle away from the source. This gives return loss of 55 dB or better — the standard requirement for passive optical networks. If you're terminating FTTH drop cables, SC/APC is normally the correct choice.

SC/UPC (Ultra Physical Contact): A flat-polished ferrule with return loss of 50 dB or better. The right choice for LAN installations, general fibre access networks and applications where APC-grade return loss isn't a specification requirement.

Both types eliminate the need for a fusion splicer on site, which is why no-splice fibre connectors like these are so widely used by field teams. No fusion equipment means lower cost per job, faster installation and less to carry to site.

View full details
Why buy from PGS

PGS is a fast connector supplier for South Africa and Africa supplying both SC/APC and SC/UPC in bulk at wholesale pricing. We carry stock on our core products so you can reorder when a project demands it without waiting on international shipping timelines.

If you're equipping a team for a large FTTH rollout, ordering stock for distribution, or running a structured cabling programme that calls for SC/APC and SC/UPC mechanical fast connectors in South Africa , contact us for bulk pricing and minimum quantities.

Specifications & Overview of SFP and SFP+ Optical Transceiver Cleaner Pens
Connector Type SC Mechanical Fast Connector
Polish / Finish SC/APC (Angled Physical Contact)
Fibre Type Single-mode (SMF) 9/125 µm
Bare Fibre Diameter 125 µm
Termination Method Mechanical alignment — no fusion splicing required
Insertion Loss ≤ 0.3 dB typical, 0.5 dB maximum
Return Loss (SC/UPC) 50 dB or better
Return Loss (SC/APC) 55 dB or better
Operating Temperature -40°C to +75°C (model dependent)
Cable Compatibility 3.0×2.0 mm drop cable, 2.0 mm, 3.0 mm, FTTH drop cable
Applications & Compatibility

SC/APC and SC/UPC mechanical fast connectors are used anywhere a technician needs to terminate fibre quickly, in the field, without a fusion splicer:

FTTH and FTTx rollouts. SC fast connectors for FTTH South Africa are the standard solution for drop-cable termination at the subscriber end in passive optical networks. Contractors running large FTTH programmes go through these in volume.

Field repairs and emergency restoration. When a live fibre link fails and needs immediate restoration, a field termination fibre connector gets the link back faster than any fusion-based approach. No power, no equipment trolley — just a hand tool kit.

Access network and LAN installations. LAN, WAN and broadband infrastructure projects where mechanical splice connectors for single-mode fibre make more practical sense than bringing fusion equipment to every termination point.

Remote and rural deployments. Where the cost or logistics of transporting fusion equipment to site isn't practical, a SC/APC or SC/UPC mechanical fast connector is the most viable termination method.

Why Choose PGS & FAQs
What is the difference between an SC/APC and an SC/UPC fast connector?
The difference is in the ferrule polish angle. SC/APC has an 8-degree angled polish that reduces back-reflection to 55 dB or better — required for PON/FTTH passive optical networks. SC/UPC is flat-polished with return loss of 50 dB or better and is used in LAN and general fibre access installations. As a SC/APC and SC/UPC mechanical fast connector supplier in South Africa , we stock both — confirm which type your project specifies before ordering.
What tools are needed to install a mechanical fast connector?
A fibre stripper and a fibre cleaver. No fusion splicer, no polishing equipment and no epoxy. That's the key practical benefit of no-splice fibre connectors for field work.
Can these connectors be reused?
Most are designed for single-use. Some models are re-openable, but optical performance after reopening is not guaranteed. For permanent installations, treat them as single-use.
What fibre cable types are compatible?
Standard single-mode 9/125 µm fibre in 0.9 mm buffer, 2.0 mm and 3.0 mm jackets, plus FTTH drop cables. Confirm cable compatibility for your specific model before placing a bulk order.
Do you supply these as a fast connector supplier for Africa-wide orders?
Yes. As a fast connector supplier serving South Africa and Africa , we can supply distributors and project operators regionally. Contact us to discuss quantities and delivery terms.
Product Product subtotal Quantity Price Product subtotal
SFP and SFP+ Optical Transceiver Cleaner Pens
SFP and SFP+ Optical Transceiver Cleaner Pens
SFP and SFP+ Optical Transceiver Cleaner Pens
R 0.00/ea		 R 0.00
R 0.00/ea R 0.00